How To Fix USB Flash Drive With This New Trick (2022)
About This Post
Assalam O Alaikum friends once again welcome to my Blog. Today in this post I will show you how to fix your USB flash drive on your pc. I have brought a wonderful and mind-blowing command for all of you in this post. The name of this command is the "DISKPART" command. This command helps you to fix
Importance Of This Command
friends as you know that these days everyone has a computer or laptop and everyone have a USB flash drive. The main work of a USB flash drive is to share data from one computer to another computer. Sometimes this USB flash drive has been corrupted and shows some errors. Due to that problem at last your USB flash drive not working. At that time you cannot share data from one computer to another computer and then you get in trouble and finally you put the USB flash drive in the trash bin. but I will tell you how you can fix your USB flash drive on your pc without any investment. So friends continue reading this post from start to end to get all biodata of this command.
How It Works
So friends now I am going to tell you the working process of the Diskpart command which I mentioned in this post above. Basically when any USB flash drive is corrupted and shows some errors so at that time first of all you will need to format your USB flash drive on your pc either way. If you use the Custom method to format your USB flash drive on your pc. So you cannot format your USB flash drive and it shows a problem of "Window was unable to complete this format" and this is a common problem. But if you use this command to format a USB flash drive on your pc. So your formatting process will also be completed easily. This command always helps you to format your USB flash drive. Because it is a simple and better way to format it. This command helps you to format it deeply. If you know how to use this command so you will need to continue reading this post.
How To Use This Command
There are simple ways to use this command. Follow these steps to use it.
1- First of all click on the "START" button and type in the search box "CMD" and right-click on it and press the "RUN AS ADMINISTRATOR" option and then click on "YES".
2- First of all type "DISKPART" in cmd and then hit an enter.
3- Then type "LIST DISK" and the list of the disks show you in the CMD.
4- After selecting the disk which you want to format it.
5- Then type "CLEAN" and hit enter.
6- Then type "ACTIVE" and then press enter.
7- After this type "CREATE PARTITION PRIMARY" and then hit enter.
8- Then type "FORMAT FS=FAT32" and press the enter button.
9- After all the formatting process is now started.
10- When the formatting process is complete.
11-Then your USB flash drive is fixed.
12- Enjoy
Conclusion
Friends as you know that I told you all the working processes of this command and I also told you how you can use it. I have clear all of your concepts. I understand all information about this command in full detail and I hope you find this post helpful. If you have any other questions about it then you can comment here.
